Disk space¶

The first step in training with large data is downloading the data and preprocessing it. For this tutorial, we will be using the full ImageNet dataset. Note that, at least 2 TB of disk space is required to download and preprocess this data. It is strongly recommended to use SSD instead of HDD. SSD is much better at dealing with a large number of small image files. After the preprocessing completes and images are packed into recordIO files, HDD should be fine for training.

In this tutorial, we will use an AWS storage instance for data preprocessing. The storage instance i3.4xlarge has 3.8 TB of disk space across two NVMe SSD disks. We will use software RAID to combine them into one disk and mount it at ~/data.

sudo mdadm --create --verbose /dev/md0 --level=stripe --raid-devices=2 \
    /dev/nvme0n1 /dev/nvme1n1
sudo mkfs /dev/md0
sudo mkdir ~/data
sudo mount /dev/md0 ~/data
sudo chown ${whoami} ~/data

We now have sufficient disk space to download and preprocess the data.

Download ImageNet¶

In this tutorial, we will be using the full ImageNet dataset which can be downloaded from http://www.image-net.org/download-images. fall11_whole.tar contains all the images. This file is 1.2 TB in size and could take a long time to download.

After downloading, untar the file.

export ROOT=full
mkdir $ROOT
tar -xvf fall11_whole.tar -C $ROOT

That should give you a collection of tar files. Each tar file represents a category and contains all images belonging to that category. We can unzip each tar file and copy the images into a folder named after the name of the tar file.

for i in $ROOT/*.tar; do j=${i%.*}; echo $j;  mkdir -p $j; tar -xf $i -C $j; done
rm $ROOT/*.tar

ls $ROOT | head
n00004475
n00005787
n00006024
n00006484
n00007846
n00015388
n00017222
n00021265
n00021939
n00120010

Remove uncommon classes for transfer learning (optional)¶

A common reason to train a network on ImageNet data is to use it for transfer learning (including feature extraction or fine-tuning other models). According to this study, classes with too few images don’t help in transfer learning. So, we could remove classes with fewer than a certain number of images. The following code will remove classes with less than 500 images.

BAK=${ROOT}_filtered
mkdir -p ${BAK}
for c in ${ROOT}/n*; do
    count=`ls $c/*.JPEG | wc -l`
    if [ "$count" -gt "500" ]; then
        echo "keep $c, count = $count"
    else
        echo "remove $c, $count"
        mv $c ${BAK}/
    fi
done

Generate a validation set¶

To ensure we don’t overfit the data, we will create a validation set separate from the training set. During training, we will monitor loss on the validation set frequently. We create the validation set by picking fifty random images from each class and moving them to the validation set.

VAL_ROOT=${ROOT}_val
mkdir -p ${VAL_ROOT}
for i in ${ROOT}/n*; do
    c=`basename $i`
    echo $c
    mkdir -p ${VAL_ROOT}/$c
    for j in `ls $i/*.JPEG | shuf | head -n 50`; do
        mv $j ${VAL_ROOT}/$c/
    done
done

Pack images into record files¶

While MXNet can read image files directly, it is recommended to pack the image files into a recordIO file for increased performance. MXNet provides a tool (tools/im2rec.py) to do this. To use this tool, MXNet and OpenCV’s python module needs to be installed in the system.

Set the environment variable MXNET to point to the MXNet installation directory and NAME to the name of the dataset. Here, we assume MXNet is installed at ~/mxnet

MXNET=~/mxnet
NAME=full_imagenet_500_filtered

To create the recordIO files, we first create a list of images we want in the recordIO files and then use im2rec to pack images in the list into recordIO files. We create this list in train_meta. Training data is around 1TB. We split it into 8 parts, with each part roughly 100 GB in size.

mkdir -p train_meta
python ${MXNET}/tools/im2rec.py --list True --chunks 8 --recursive True \
train_meta/${NAME} ${ROOT}

We then resize the images such that the short edge is 480 pixels long and pack the images into recordIO files. Since most of the work is disk I/O, we use multiple (16) threads to get the work done faster.

python ${MXNET}/tools/im2rec.py --resize 480 --quality 90 \
--num-thread 16 train_meta/${NAME} ${ROOT}

Once done, we move the rec files into a folder named train.

mkdir -p train
mv train_meta/*.rec train/

We do similar preprocessing for the validation set.

mkdir -p val_meta
python ${MXNET}/tools/im2rec.py --list True --recursive True \
val_meta/${NAME} ${VAL_ROOT}
python ${MXNET}/tools/im2rec.py --resize 480 --quality 90 \
--num-thread 16 val_meta/${NAME} ${VAL_ROOT}
mkdir -p val
mv val_meta/*.rec val/

We now have all training and validation images in recordIO format in train and val directories respectively. We can now use these .rec files for training.

Setup¶

We will use 16 machines (P2.16x instances), each containing 16 GPUs (Tesla K80). These machines are interconnected via 20 Gbps ethernet.

AWS CloudFormation makes it very easy to create deep learning clusters. We follow instructions from this page and create a deep learning cluster with 16 P2.16x instances.

We load the data and code in the first machine (we’ll refer to this machine as master). We share both the data and code to other machines using EFS.

If you are setting up your cluster manually, without using AWS CloudFormation, remember to do the following:

1. Compile MXNet using USE_DIST_KVSTORE=1 to enable distributed training.

2. Create a hosts file in the master that contains the host names of all the machines in the cluster. For example,

   $ head -3 hosts
   deeplearning-worker1
   deeplearning-worker2
   deeplearning-worker3
   

   It should be possible to ssh into any of these machines from the master by invoking ssh with just a hostname from the file. For example,

   $ ssh deeplearning-worker2
   ===================================
   Deep Learning AMI for Ubuntu
   ===================================
   ...
   ubuntu@ip-10-0-1-199:~$
   

   One way to do this is to use ssh agent forwarding. Please check this page to learn how to set this up. In short, you’ll configure all machines to login using a particular certificate (mycert.pem) which is present on your local machine. You then login to the master using the certificate and the -A switch to enable agent forwarding. Now, from the master, you should be able to login to any other machine in the cluster by providing just the hostname (example: ssh deeplearning-worker2).

Run Training¶

After the cluster is setup, login to master and run the following command from ${MXNET}/example/image-classification

../../tools/launch.py -n 16 -H $DEEPLEARNING_WORKERS_PATH python train_imagenet.py --network resnet \
--num-layers 152 --data-train ~/data/train --data-val ~/data/val/ --gpus 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 \
--batch-size 8192 --model ~/data/model/resnet152 --num-epochs 1 --kv-store dist_sync

launch.py launches the command it is provided in all the machine in the cluster. List of machines in the cluster must be provided to launch.py using the -H switch. Here is description of options used for launch.py.

train_imagenet.py trains the network provided by the --network option using the data provided by the --data-train and --data-val options. Here is description of the options used with train_imagenet.py.

After training is complete, trained models are available in the directory specified by the --model option. Models are saved in two parts: model-symbol.json for the network definition and model-n.params for the parameters saved after the n’th epoch.

Validation accuracy¶

It is often straightforward to achieve a reasonable validation accuracy, but achieving the state-of-the-art numbers reported in papers can sometimes be very hard. Here are few things you can try to improve validation accuracy.

• Adding more data augmentations often reduces the gap between training and validation accuracy. Data augmentation could be reduced in epochs closer to the end.
• Start with a large learning rate and keep it large for a long time. For example, in CIFAR10, you could keep the learning rate at 0.1 for the first 200 epochs and then reduce it to 0.01.
• Do not use a batch size that is too large, especially batch size >> number of classes.

Speed¶

• Distributed training improves speed when computation cost of a batch is high. So, make sure your workload is not too small (like LeNet on MNIST). Make sure batch size is reasonably large.
• Make sure data-read and preprocessing is not the bottleneck. Use the --test-io 1 flag to check how many images can be pre-processed per second.
• Increase –data-nthreads (default is 4) to use more threads for data preprocessing.
• Data preprocessing is done by opencv. If opencv is compiled from source code, check if it is configured correctly.
• Use --benchmark 1 to use randomly generated data rather than real data to narrow down where the bottleneck is.
• Check this page for more details.

Memory¶

If the batch size is too big, it can exhaust GPU memory. If this happens, you’ll see the error message “cudaMalloc failed: out of memory” or something similar. There are a couple of ways to fix this:

• Reduce the batch size.
• Set the environment variable MXNET_BACKWARD_DO_MIRROR to 1. It reduces the memory consumption by trading off speed. For example, with batch size 64, inception-v3 uses 10G memory and trains 30 image/sec on a single K80 GPU. When mirroring is enabled, with 10G GPU memory consumption, we can run inception-v3 using batch size of 128. The cost is that, the speed reduces to 27 images/sec.